An AudioSource that takes a PositionableAudioSource and allows it to be played, stopped, started, etc. More...

Inheritance diagram for AudioTransportSource:

Public Member Functions
	AudioTransportSource ()
	Creates an AudioTransportSource. More...

	~AudioTransportSource () override
	Destructor. More...

void	setSource (PositionableAudioSource newSource, int readAheadBufferSize=0, TimeSliceThread readAheadThread=nullptr, double sourceSampleRateToCorrectFor=0.0, int maxNumChannels=2)
	Sets the reader that is being used as the input source. More...

void	setPosition (double newPosition)
	Changes the current playback position in the source stream. More...

double	getCurrentPosition () const
	Returns the position that the next data block will be read from This is a time in seconds. More...

double	getLengthInSeconds () const
	Returns the stream's length in seconds. More...

bool	hasStreamFinished () const noexcept
	Returns true if the player has stopped because its input stream ran out of data. More...

void	start ()
	Starts playing (if a source has been selected). More...

void	stop ()
	Stops playing. More...

bool	isPlaying () const noexcept
	Returns true if it's currently playing. More...

void	setGain (float newGain) noexcept
	Changes the gain to apply to the output. More...

float	getGain () const noexcept
	Returns the current gain setting. More...

void	prepareToPlay (int samplesPerBlockExpected, double sampleRate) override
	Implementation of the AudioSource method. More...

void	releaseResources () override
	Implementation of the AudioSource method. More...

void	getNextAudioBlock (const AudioSourceChannelInfo &) override
	Implementation of the AudioSource method. More...

void	setNextReadPosition (int64 newPosition) override
	Implements the PositionableAudioSource method. More...

int64	getNextReadPosition () const override
	Implements the PositionableAudioSource method. More...

int64	getTotalLength () const override
	Implements the PositionableAudioSource method. More...

bool	isLooping () const override
	Implements the PositionableAudioSource method. More...

Public Member Functions inherited from PositionableAudioSource
	~PositionableAudioSource () override=default
	Destructor. More...

virtual void	setLooping (bool shouldLoop)
	Tells the source whether you'd like it to play in a loop. More...

Public Member Functions inherited from AudioSource
virtual	~AudioSource ()=default
	Destructor. More...

Public Member Functions inherited from ChangeBroadcaster
	ChangeBroadcaster () noexcept
	Creates an ChangeBroadcaster. More...

virtual	~ChangeBroadcaster ()
	Destructor. More...

void	addChangeListener (ChangeListener *listener)
	Registers a listener to receive change callbacks from this broadcaster. More...

void	removeChangeListener (ChangeListener *listener)
	Unregisters a listener from the list. More...

void	removeAllChangeListeners ()
	Removes all listeners from the list. More...

void	sendChangeMessage ()
	Causes an asynchronous change message to be sent to all the registered listeners. More...

void	sendSynchronousChangeMessage ()
	Sends a synchronous change message to all the registered listeners. More...

void	dispatchPendingMessages ()
	If a change message has been sent but not yet dispatched, this will call sendSynchronousChangeMessage() to make the callback immediately. More...

Additional Inherited Members
Protected Member Functions inherited from PositionableAudioSource
	PositionableAudioSource ()=default
	Creates the PositionableAudioSource. More...

Protected Member Functions inherited from AudioSource
	AudioSource ()=default
	Creates an AudioSource. More...

Detailed Description

An AudioSource that takes a PositionableAudioSource and allows it to be played, stopped, started, etc.

This can also be told use a buffer and background thread to read ahead, and if can correct for different sample-rates.

You may want to use one of these along with an AudioSourcePlayer and AudioIODevice to control playback of an audio file.

See also: AudioSource, AudioSourcePlayer

Constructor & Destructor Documentation

◆ AudioTransportSource()

AudioTransportSource::AudioTransportSource ( )

Creates an AudioTransportSource.

After creating one of these, use the setSource() method to select an input source.

◆ ~AudioTransportSource()

AudioTransportSource::~AudioTransportSource ( )

override

Destructor.

Member Function Documentation

◆ setSource()

void AudioTransportSource::setSource	(	PositionableAudioSource *	newSource,
		int	readAheadBufferSize = `0`,
		TimeSliceThread *	readAheadThread = `nullptr`,
		double	sourceSampleRateToCorrectFor = `0.0`,
		int	maxNumChannels = `2`
	)

Sets the reader that is being used as the input source.

This will stop playback, reset the position to 0 and change to the new reader.

The source passed in will not be deleted by this object, so must be managed by the caller.

Parameters

newSource	the new input source to use. This may be a nullptr
readAheadBufferSize	a size of buffer to use for reading ahead. If this is zero, no reading ahead will be done; if it's greater than zero, a BufferingAudioSource will be used to do the reading-ahead. If you set a non-zero value here, you'll also need to set the readAheadThread parameter.
readAheadThread	if you set readAheadBufferSize to a non-zero value, then you'll also need to supply this TimeSliceThread object for the background reader to use. The thread object must not be deleted while the AudioTransport source is still using it.
sourceSampleRateToCorrectFor	if this is non-zero, it specifies the sample rate of the source, and playback will be sample-rate adjusted to maintain playback at the correct pitch. If this is 0, no sample-rate adjustment will be performed
maxNumChannels	the maximum number of channels that may need to be played

◆ setPosition()

void AudioTransportSource::setPosition ( double newPosition )

Changes the current playback position in the source stream.

The next time the getNextAudioBlock() method is called, this is the time from which it'll read data.

Parameters

newPosition the new playback position in seconds

See also: getCurrentPosition

◆ getCurrentPosition()

double AudioTransportSource::getCurrentPosition ( ) const

Returns the position that the next data block will be read from This is a time in seconds.

◆ getLengthInSeconds()

double AudioTransportSource::getLengthInSeconds ( ) const

Returns the stream's length in seconds.

◆ hasStreamFinished()

bool AudioTransportSource::hasStreamFinished ( ) const

noexcept

Returns true if the player has stopped because its input stream ran out of data.

◆ start()

void AudioTransportSource::start ( )

Starts playing (if a source has been selected).

If it starts playing, this will send a message to any ChangeListeners that are registered with this object.

◆ stop()

void AudioTransportSource::stop ( )

Stops playing.

If it's actually playing, this will send a message to any ChangeListeners that are registered with this object.

◆ isPlaying()

bool AudioTransportSource::isPlaying ( ) const

noexcept

Returns true if it's currently playing.

◆ setGain()

void AudioTransportSource::setGain ( float newGain )

noexcept

Changes the gain to apply to the output.

Parameters

newGain a factor by which to multiply the outgoing samples, so 1.0 = 0dB, 0.5 = -6dB, 2.0 = 6dB, etc.

◆ getGain()

float AudioTransportSource::getGain ( ) const

noexcept

Returns the current gain setting.

See also: setGain

References AudioSource::getNextAudioBlock(), PositionableAudioSource::getNextReadPosition(), PositionableAudioSource::getTotalLength(), PositionableAudioSource::isLooping(), JUCE_DECLARE_NON_COPYABLE_WITH_LEAK_DETECTOR, AudioSource::prepareToPlay(), AudioSource::releaseResources(), and PositionableAudioSource::setNextReadPosition().

◆ prepareToPlay()

void AudioTransportSource::prepareToPlay	(	int	samplesPerBlockExpected,
		double	sampleRate
	)

overridevirtual

Implementation of the AudioSource method.

Implements AudioSource.

◆ releaseResources()

void AudioTransportSource::releaseResources ( )

overridevirtual

Implementation of the AudioSource method.

Implements AudioSource.

◆ getNextAudioBlock()

void AudioTransportSource::getNextAudioBlock ( const AudioSourceChannelInfo & )

overridevirtual

Implementation of the AudioSource method.

Implements AudioSource.

◆ setNextReadPosition()

void AudioTransportSource::setNextReadPosition ( int64 newPosition )

overridevirtual

Implements the PositionableAudioSource method.

Implements PositionableAudioSource.

◆ getNextReadPosition()

int64 AudioTransportSource::getNextReadPosition ( ) const

overridevirtual

Implements the PositionableAudioSource method.

Implements PositionableAudioSource.

◆ getTotalLength()

int64 AudioTransportSource::getTotalLength ( ) const

overridevirtual

Implements the PositionableAudioSource method.

Implements PositionableAudioSource.

◆ isLooping()

bool AudioTransportSource::isLooping ( ) const

overridevirtual

Implements the PositionableAudioSource method.

Implements PositionableAudioSource.

The documentation for this class was generated from the following file:

juce_AudioTransportSource.h

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ AudioTransportSource()

◆ ~AudioTransportSource()

Member Function Documentation

◆ setSource()

◆ setPosition()

◆ getCurrentPosition()

◆ getLengthInSeconds()

◆ hasStreamFinished()

◆ start()

◆ stop()

◆ isPlaying()

◆ setGain()

◆ getGain()

◆ prepareToPlay()

◆ releaseResources()

◆ getNextAudioBlock()

◆ setNextReadPosition()

◆ getNextReadPosition()

◆ getTotalLength()

◆ isLooping()