A class that imposes restrictions on a Component's size or position. More...

Public Member Functions
	ComponentBoundsConstrainer () noexcept
	When first created, the object will not impose any restrictions on the components. More...

virtual	~ComponentBoundsConstrainer ()
	Destructor. More...

void	setMinimumWidth (int minimumWidth) noexcept
	Imposes a minimum width limit. More...

int	getMinimumWidth () const noexcept
	Returns the current minimum width. More...

void	setMaximumWidth (int maximumWidth) noexcept
	Imposes a maximum width limit. More...

int	getMaximumWidth () const noexcept
	Returns the current maximum width. More...

void	setMinimumHeight (int minimumHeight) noexcept
	Imposes a minimum height limit. More...

int	getMinimumHeight () const noexcept
	Returns the current minimum height. More...

void	setMaximumHeight (int maximumHeight) noexcept
	Imposes a maximum height limit. More...

int	getMaximumHeight () const noexcept
	Returns the current maximum height. More...

void	setMinimumSize (int minimumWidth, int minimumHeight) noexcept
	Imposes a minimum width and height limit. More...

void	setMaximumSize (int maximumWidth, int maximumHeight) noexcept
	Imposes a maximum width and height limit. More...

void	setSizeLimits (int minimumWidth, int minimumHeight, int maximumWidth, int maximumHeight) noexcept
	Set all the maximum and minimum dimensions. More...

void	setMinimumOnscreenAmounts (int minimumWhenOffTheTop, int minimumWhenOffTheLeft, int minimumWhenOffTheBottom, int minimumWhenOffTheRight) noexcept
	Sets the amount by which the component is allowed to go off-screen. More...

int	getMinimumWhenOffTheTop () const noexcept
	Returns the minimum distance the bounds can be off-screen. More...

int	getMinimumWhenOffTheLeft () const noexcept
	Returns the minimum distance the bounds can be off-screen. More...

int	getMinimumWhenOffTheBottom () const noexcept
	Returns the minimum distance the bounds can be off-screen. More...

int	getMinimumWhenOffTheRight () const noexcept
	Returns the minimum distance the bounds can be off-screen. More...

void	setFixedAspectRatio (double widthOverHeight) noexcept
	Specifies a width-to-height ratio that the resizer should always maintain. More...

double	getFixedAspectRatio () const noexcept
	Returns the aspect ratio that was set with setFixedAspectRatio(). More...

virtual void	checkBounds (Rectangle< int > &bounds, const Rectangle< int > &previousBounds, const Rectangle< int > &limits, bool isStretchingTop, bool isStretchingLeft, bool isStretchingBottom, bool isStretchingRight)
	This callback changes the given coordinates to impose whatever the current constraints are set to be. More...

virtual void	resizeStart ()
	This callback happens when the resizer is about to start dragging. More...

virtual void	resizeEnd ()
	This callback happens when the resizer has finished dragging. More...

void	setBoundsForComponent (Component *component, Rectangle< int > bounds, bool isStretchingTop, bool isStretchingLeft, bool isStretchingBottom, bool isStretchingRight)
	Checks the given bounds, and then sets the component to the corrected size. More...

void	checkComponentBounds (Component *component)
	Performs a check on the current size of a component, and moves or resizes it if it fails the constraints. More...

virtual void	applyBoundsToComponent (Component &, Rectangle< int > bounds)
	Called by setBoundsForComponent() to apply a new constrained size to a component. More...

Detailed Description

A class that imposes restrictions on a Component's size or position.

This is used by classes such as ResizableCornerComponent, ResizableBorderComponent and ResizableWindow.

The base class can impose some basic size and position limits, but you can also subclass this for custom uses.

See also: ResizableCornerComponent, ResizableBorderComponent, ResizableWindow

Constructor & Destructor Documentation

◆ ComponentBoundsConstrainer()

ComponentBoundsConstrainer::ComponentBoundsConstrainer ( )

noexcept

When first created, the object will not impose any restrictions on the components.

◆ ~ComponentBoundsConstrainer()

virtual ComponentBoundsConstrainer::~ComponentBoundsConstrainer ( )

virtual

Destructor.

Member Function Documentation

◆ setMinimumWidth()

void ComponentBoundsConstrainer::setMinimumWidth ( int minimumWidth )

noexcept

Imposes a minimum width limit.

◆ getMinimumWidth()

int ComponentBoundsConstrainer::getMinimumWidth ( ) const

noexcept

Returns the current minimum width.

◆ setMaximumWidth()

void ComponentBoundsConstrainer::setMaximumWidth ( int maximumWidth )

noexcept

Imposes a maximum width limit.

◆ getMaximumWidth()

int ComponentBoundsConstrainer::getMaximumWidth ( ) const

noexcept

Returns the current maximum width.

◆ setMinimumHeight()

void ComponentBoundsConstrainer::setMinimumHeight ( int minimumHeight )

noexcept

Imposes a minimum height limit.

◆ getMinimumHeight()

int ComponentBoundsConstrainer::getMinimumHeight ( ) const

noexcept

Returns the current minimum height.

◆ setMaximumHeight()

void ComponentBoundsConstrainer::setMaximumHeight ( int maximumHeight )

noexcept

Imposes a maximum height limit.

◆ getMaximumHeight()

int ComponentBoundsConstrainer::getMaximumHeight ( ) const

noexcept

Returns the current maximum height.

◆ setMinimumSize()

void ComponentBoundsConstrainer::setMinimumSize	(	int	minimumWidth,
		int	minimumHeight
	)

noexcept

Imposes a minimum width and height limit.

◆ setMaximumSize()

void ComponentBoundsConstrainer::setMaximumSize	(	int	maximumWidth,
		int	maximumHeight
	)

noexcept

Imposes a maximum width and height limit.

◆ setSizeLimits()

void ComponentBoundsConstrainer::setSizeLimits	(	int	minimumWidth,
		int	minimumHeight,
		int	maximumWidth,
		int	maximumHeight
	)

noexcept

Set all the maximum and minimum dimensions.

◆ setMinimumOnscreenAmounts()

void ComponentBoundsConstrainer::setMinimumOnscreenAmounts	(	int	minimumWhenOffTheTop,
		int	minimumWhenOffTheLeft,
		int	minimumWhenOffTheBottom,
		int	minimumWhenOffTheRight
	)

noexcept

Sets the amount by which the component is allowed to go off-screen.

The values indicate how many pixels must remain on-screen when dragged off one of its parent's edges, so e.g. if minimumWhenOffTheTop is set to 10, then when the component goes off the top of the screen, its y-position will be clipped so that there are always at least 10 pixels on-screen. In other words, the lowest y-position it can take would be (10 - the component's height).

If you pass 0 or less for one of these amounts, the component is allowed to move beyond that edge completely, with no restrictions at all.

If you pass a very large number (i.e. larger that the dimensions of the component itself), then the component won't be allowed to overlap that edge at all. So e.g. setting minimumWhenOffTheLeft to 0xffffff will mean that the component will bump into the left side of the screen and go no further.

◆ getMinimumWhenOffTheTop()

int ComponentBoundsConstrainer::getMinimumWhenOffTheTop ( ) const

noexcept

Returns the minimum distance the bounds can be off-screen.

See also: setMinimumOnscreenAmounts

◆ getMinimumWhenOffTheLeft()

int ComponentBoundsConstrainer::getMinimumWhenOffTheLeft ( ) const

noexcept

Returns the minimum distance the bounds can be off-screen.

See also: setMinimumOnscreenAmounts

◆ getMinimumWhenOffTheBottom()

int ComponentBoundsConstrainer::getMinimumWhenOffTheBottom ( ) const

noexcept

Returns the minimum distance the bounds can be off-screen.

See also: setMinimumOnscreenAmounts

◆ getMinimumWhenOffTheRight()

int ComponentBoundsConstrainer::getMinimumWhenOffTheRight ( ) const

noexcept

Returns the minimum distance the bounds can be off-screen.

See also: setMinimumOnscreenAmounts

References JUCE_DECLARE_NON_COPYABLE_WITH_LEAK_DETECTOR.

◆ setFixedAspectRatio()

void ComponentBoundsConstrainer::setFixedAspectRatio ( double widthOverHeight )

noexcept

Specifies a width-to-height ratio that the resizer should always maintain.

If the value is 0, no aspect ratio is enforced. If it's non-zero, the width will always be maintained as this multiple of the height.

See also: setResizeLimits

◆ getFixedAspectRatio()

double ComponentBoundsConstrainer::getFixedAspectRatio ( ) const

noexcept

Returns the aspect ratio that was set with setFixedAspectRatio().

If no aspect ratio is being enforced, this will return 0.

◆ checkBounds()

virtual void ComponentBoundsConstrainer::checkBounds	(	Rectangle< int > &	bounds,
		const Rectangle< int > &	previousBounds,
		const Rectangle< int > &	limits,
		bool	isStretchingTop,
		bool	isStretchingLeft,
		bool	isStretchingBottom,
		bool	isStretchingRight
	)

virtual

This callback changes the given coordinates to impose whatever the current constraints are set to be.

Parameters

bounds	the target position that should be examined and adjusted
previousBounds	the component's current size
limits	the region in which the component can be positioned
isStretchingTop	whether the top edge of the component is being resized
isStretchingLeft	whether the left edge of the component is being resized
isStretchingBottom	whether the bottom edge of the component is being resized
isStretchingRight	whether the right edge of the component is being resized

◆ resizeStart()

virtual void ComponentBoundsConstrainer::resizeStart ( )

virtual

This callback happens when the resizer is about to start dragging.

◆ resizeEnd()

virtual void ComponentBoundsConstrainer::resizeEnd ( )

virtual

This callback happens when the resizer has finished dragging.

◆ setBoundsForComponent()

void ComponentBoundsConstrainer::setBoundsForComponent	(	Component *	component,
		Rectangle< int >	bounds,
		bool	isStretchingTop,
		bool	isStretchingLeft,
		bool	isStretchingBottom,
		bool	isStretchingRight
	)

Checks the given bounds, and then sets the component to the corrected size.

◆ checkComponentBounds()

void ComponentBoundsConstrainer::checkComponentBounds ( Component * component )

Performs a check on the current size of a component, and moves or resizes it if it fails the constraints.

◆ applyBoundsToComponent()

virtual void ComponentBoundsConstrainer::applyBoundsToComponent	(	Component &	,
		Rectangle< int >	bounds
	)

virtual

Called by setBoundsForComponent() to apply a new constrained size to a component.

By default this just calls setBounds(), but is virtual in case it's needed for extremely cunning purposes.

The documentation for this class was generated from the following file:

juce_ComponentBoundsConstrainer.h

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ ComponentBoundsConstrainer()

◆ ~ComponentBoundsConstrainer()

Member Function Documentation

◆ setMinimumWidth()

◆ getMinimumWidth()

◆ setMaximumWidth()

◆ getMaximumWidth()

◆ setMinimumHeight()

◆ getMinimumHeight()

◆ setMaximumHeight()

◆ getMaximumHeight()

◆ setMinimumSize()

◆ setMaximumSize()

◆ setSizeLimits()

◆ setMinimumOnscreenAmounts()

◆ getMinimumWhenOffTheTop()

◆ getMinimumWhenOffTheLeft()

◆ getMinimumWhenOffTheBottom()

◆ getMinimumWhenOffTheRight()

◆ setFixedAspectRatio()

◆ getFixedAspectRatio()

◆ checkBounds()

◆ resizeStart()

◆ resizeEnd()

◆ setBoundsForComponent()

◆ checkComponentBounds()

◆ applyBoundsToComponent()